MIPI CSI camera

Name: PH-Cam-M MIPI CSI camera
Brand: Pikhta
SKU: PH-Cam-M

Sony IMX477 12 MP camera module with an M12 lens on a MIPI CSI-2 ribbon cable — for the PH-K01, PH-J01 and PH-J31: no USB, no network, minimal latency, driver in the system image.

Price — on request

RUB excl. VAT; quotation within 2 business days, valid 30 days

Lead time: in the quotation (driver for the customer's board)
Minimum order: 1 unit; batch — from 10 units

Test program →

PH-Cam-M: IMX477 camera module on a 38×38 mm board with an M12 lens — PH-Cam-M

Sony IMX477 12.3 MP 1/2.3″: 4056×3040@10, 1080p@60; IMX219 8 MP option
MIPI CSI-2 2 / 4 lane, 15- or 22-pin ribbon cable — to match the carrier connector, included
M12 6 mm lens (≈65°) with manual focus; 8 / 12 mm — options; IR-cut filter
Driver and ISP profile in the PH-K01 / PH-J01 / PH-J31 system image; up to 2–4 cameras per device

Typical uses: embedding into your own device · robot and manipulator · vehicle cab · test bench and development

What it is and what for

A ribbon-cable camera for boards and boxes with a CSI connector: Sony IMX477 12.3 MP sensor (IMX219 8 MP option), M12 lens with manual focus, 15- / 22-pin ribbon cable. Frames go straight into the processor's ISP — no USB controller and no second network; the driver and ISP settings are already in our system image for RK3588 and Jetson. For embedding into your own device, a robot or a vehicle cab: ribbon cable up to 30 cm, camera housing and extension — options. Need a camera at a distance — USB (PH-Cam-K) or IP (PH-Cam-S / PH-Cam-O).

Straight talk: The MIPI ribbon cable runs up to 30 cm and only inside the enclosure: for a camera at a distance you need USB (PH-Cam-K) or IP (PH-Cam-S / PH-Cam-O).

Prices for 1 / 10 / 100 units and for options are given in the quotation: the “Request a quotation” button above, reply within 2 business days. The price depends on volume, the exchange rate and the DRAM index, so it is fixed in a quotation valid for 30 days.

Configuration options
IMX477 12 MP, M12 6 mm lens — base	base
8 mm (≈50°) or 12 mm (≈33°) lens	no surcharge
IMX219 8 MP (2 lane)	on request
IMX296 1.6 MP global shutter	on request
Camera housing with a 1/4″-20 tripod mount	on request

In the quotation the price is itemized by line: device, engineering package, service coverage, custom engineering on request — what goes into each line, in “How to buy”. The contract includes a price-revision formula tied to the Bank of Russia exchange rate and the DRAM index.

Platform and processing
Processing	camera ISP; inference runs on the edge computer (PH-K30 / PH-K40 / PH-K01 / PH-J31 / PH-J01)
TOPS INT8 dense	not applicable (models run on the edge computer)method: —
Memory	not applicable
Storage	none (frames are not stored in the camera)

Optics and sensor
Sensor	Sony IMX477 1/2.3″ 12.3 MP (options: IMX219 1/4″ 8 MP; IMX296 — global shutter)
Shutter	rolling; global — IMX296 option
Resolution	4056×3040@10, 1920×1080@60 (IMX477); 3280×2464@21, 1080p@30 (IMX219)
Lens	M12 6 mm, ≈65° horizontal (base); 8 / 12 mm — options; manual focus
WDR	by the edge computer's ISP
IR illumination	none; IR-cut filter fitted (no-filter version — made to order)
Interface	MIPI CSI-2, 2 lane (IMX219) / 4 lane (IMX477); 15- / 22-pin 0.5 mm ribbon cable, up to 30 cm

Bench measurements
Status	pending (first samples)
What we measure	“frame → model result” latency vs. a USB camera on the same model

measured with the first samples

Interfaces
USB	none
Ethernet / PoE	none
RS-485 / CAN / RS-232	none
GPIO / relay	none
M.2	none
Video output	none
Wi-Fi / BT / LTE	none — ribbon-cable camera inside the device

Power and thermal
Power input	3.3 V over the ribbon cable from the device
Power consumption (typical)	≈0.5 W
Power consumption (peak)	≤1 W
Cooling	passive
Enclosure temperature in a closed cabinet at +40 °C ambient	measured after the first sample is testedwe publish a measurement, not a datasheet value

Mechanical
Dimensions	≈38×38×20 mm with the M12 lens
Weight	≈25 g
Mounting	4 M2 holes at the board corners; holder housing with a 1/4″ thread — option
Connectors	15- / 22-pin 0.5 mm FPC ribbon cable, 15 cm included (30 cm — option)

Environment
Operating temperature	0…+50 °C
Ingress protection	none — open board; housing — option
Vibration / shock	not rated

What's included
In the box	Camera module with M12 lens, 15 cm ribbon cable (15- or 22-pin — to match the carrier connector)
	Driver and ISP profile in the device's system image
	1-year warranty, replacement or spares
	Product passport

Documents
EAC declaration	in progressas part of the device declaration (to be confirmed)
FSB notification	not requiredno radio
Datasheet	PDF v0.9 web versioncomponent datasheet values until the sample is measured; printable version of this page — the “Print this page” button
Product passport	in progress
Vendor security questionnaire	not requiredcamera without a network interface — see the device questionnaire

Origin
Origin and our part	Sensor — Sony (Japan); camera module — contract manufacturer (ODM, China) under the Pikhta part number; driver, profile and kitting — in Russia.

Vendor documentation (chip and sensor)
Sony IMX477-AACK — flyer (PDF, Sony Semiconductor)	www.sony-semicon.com/files/62/pdf/p-13_IMX477-AACK_Flyer.pdffull datasheet — through a Sony distributor

We do not host third-party documents — only links to official pages; full chip datasheets come from the vendor or its distributor.